Drone LiDAR and photogrammetry capture

Point clouds, ground models, orthomosaics and 3D models of corridors, sites and structures, delivered in GDA2020 / MGA Zone 56 with the correction method stated.

Two ways to capture a site

LiDAR measures the site with laser pulses. Photogrammetry builds the site from hundreds of overlapping photos. Each suits different jobs, and many projects use both.

LiDARPhotogrammetry
Best forCorridors, vegetation, ground under trees, overhead wiringOpen sites, structures, stockpiles, visual records
Under tree coverLaser pulses pass through gaps in the canopy, so the ground can be modelled under treesOnly surfaces seen in the photos; ground under canopy is hidden
Visual detailPoints coloured from the onboard cameraSharp, high-detail imagery
Main outputsPoint cloud, ground model, contoursOrthomosaic, 3D model, point cloud
Our equipmentDJI Matrice 400 with Zenmuse L3DJI Matrice 4E (RTK)

Not sure which you need? Tell us what decision the data has to support and we'll recommend one.

How positions are corrected

  • A DJI D-RTK 3 base station is set up on site to log satellite positioning data during the flight.
  • Positions are post-processed (PPK) against that base data after the flight.
  • Outputs are delivered in GDA2020 / MGA Zone 56.
  • Satellite heights are ellipsoidal, so they are converted to the Australian Height Datum using AUSGeoid2020.

Achievable accuracy depends on the site, the sensor and the conditions on the day, so we discuss what your job needs before we fly. Every deliverable states its coordinate system, height datum and correction method.

What you get

Files that open in the software you already use

QGIS, ArcGIS, CloudCompare, AutoCAD and Google Earth all read these formats.

  • Point cloud (LAS / LAZ)Classified into ground, vegetation and structures where the job needs it.
  • Ground model (GeoTIFF)A height grid of the bare ground, for levels, drainage and terrain work.
  • Orthomosaic (GeoTIFF)A single, map-accurate aerial image of the whole site.
  • Contours (DXF)Contour lines at an interval to suit, ready for CAD.
  • 3D modelA textured model of structures or the site, for visual records and planning.
  • KML / KMZSite boundaries and key features for Google Earth.
Questions

Common questions

Is this survey-grade data?

We provide spatial data capture, not surveying. Every deliverable states its coordinate system, height datum and how positions were corrected, so your surveyor or engineer can judge whether it suits their purpose.

Are heights in AHD?

Yes. Satellite positioning gives heights above the ellipsoid, which differ from AHD by tens of metres in NSW. We convert them using AUSGeoid2020 and state this on every deliverable.

Can you capture sites outside rail?

Yes. The same capture suits power, communications and mining sites, and other infrastructure. Tell us about the site and what you need from it.

How big a site can you capture in a day?

It depends on the sensor, the detail needed, the terrain and airspace. Send us the area or a KML outline and we'll give you a realistic plan.

Need a site captured?

Send us the location and what the data is for. We'll recommend LiDAR, photogrammetry or both, with a scope and a price.